The second generation auto-synchronous bus, ASBus2, connector is designed for use with modules featuring the JetSpeed II COS201 clock circuit, and an ASBus2 connection port. The ASBus2 bridge is used to synchronize multiple digitizer modules together, taking care of the distribution of all necessary trigger and clock signals. Synchronous digitizing improves the accuracy of cross-channel measurements and is essential for accurate time correlation. The ASBus2 system can be used to phase-synchronize all digitizers to an external standard (such as a 10 MHz reference) or to improve trigger flexibility by allowing any trigger input (channel or external trigger input) to be used as the trigger source for all the other digitizers in the system. With the ASBus2 circuit, selected clock and trigger signals are propagated through all the connected modules. The position of each card is automatically detected, enabling the system to calibrate the individual channel timing delays, so that all the connected ADCs are clocked at the same time. A simple software function allows the combination of the digitizers so that they appear as a single instrument with many channels.