| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2-ch, 1 GHz, 1-2 GS/s,
128-256 kpt | | | | | | 2-ch, 1 GHz, 1-2 GS/s,
128-256 kpt or 8-16 Mpt | | | | | | 2-ch, 500 MHz, 0.5-1 GS/s,
128-256 kpt or 2-4 Mpt | | | | | | 1-ch, 1 GHz, 2 GS/s
256 kpt or 16 Mpt | | | | | | 1-ch, dual input,
500 MHz, 2 GS/s,
256 kpt or 16 Mpt | | | | | | 1-ch, 500 MHz, 2 GS/s,
256 kpt or 4 Mpt | | | | | | 1-ch, 250 MHz, 1 GS/s,
128 kpt, 2 Mpt or 8 Mpt | | | | | | 1-ch, 150 MHz, 500 MS/s,
128 kpt or 2 Mpt | | |
 |
|
|
|
 |
|
|
|
|
| • | 2 channels | | • | 1 GS/s real-time sampling rate on each channel | | • | Up to 2 GS/s real-time sampling rate in single-channel mode | | • | AC- or DC-coupled 50 Ω inputs | | • | 50 mV to 5 V full scale range | | • | 256 kpoints of memory (128 kpoints per channel) | | • | Memory segmentation | | • | Simultaneous multibuffer acquisition and readout (SAR) mode for increased data throughput | | • | PCI 32-bit/66 MHz interface | | • | External clock and reference mode operation (Clk In) | | • | Low phase noise internal clock source | | • | External trigger input (Trigger In) | | • | Auto-synchronous bus system 2nd generation (AS Bus 2) for trigger and clock signal distribution to multiple modules | | • | Power requirements < 15 W | | • | Device drivers for Windows, VxWorks, LabViewRT, and Linux | | • | Application code examples for MATLAB, C/C++, Visual Basic, LabVIEW, and LabWindows/CVI |
|
Note: Some items shown on this web site may not be listed
in the current Acqiris price list and may only be available upon
specific request. Please contact your local representative for
more information. |
|
|
|
|
